Filter
Top Products
W415-0156 / A / 04.09.03
1
INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 4Y8 Canada • (705)721-1212 • fax(705)722-6031
www.napoleonfireplaces.com • ask@napoleon.on.ca
THIS FIREPLACE HAS BEEN TESTED AND LISTED BY INTERTEK TESTING SERVICES TO STANDARDS: ULC S610, UL 127, FOR ZERO CLEARANCE FIREPLACES,
AND TO ULC S639 FOR STEEL LINER ASSEMBLIES FOR SOLID FUEL BURNING MASONRY FIREPLACES. CERTIFIED UNDER USA ENVIRONMENTAL PROTECTION
AGENCY (E.P.A.) JULY 1990 AND THE OREGON DEPARTMENT OF ENVIRONMENTAL QUALITY (D.E.Q.) PARTICULATE EMISSION STANDARDS
SOLID FUEL BURNING - ZERO CLEARANCE
INSTALLATION AND OPERATION INSTRUCTIONS
FOR HI-TECH LISTED FIREPLACE
MODEL NZ26
WARNING: If this fireplace is not properly installed, a house fire may result.
This fireplace has not been tested with an unvented gas log set. To reduce risk of fire or injury,
do not install an unvented gas log set into the fireplace.
FOR YOUR SAFETY
Follow the installation directions. This fireplace can be very hot when burning. Combustible
materials such as firewood, wet clothing, etc. placed too close can catch fire. Children and
pets must be kept from touching the fireplace when it is hot. The chimney must be sound and
free of cracks. Before installing this unit, contact the local building or fire authority and follow
their guidelines.
Operate only with the door tightly closed. Burn wood behind the log retainer directly on the
firebricks. Do not use an elevated grate or otherwise raise the fire. This fireplace is designed
to burn natural wood only. Higher efficiencies and lower emissions generally result when
burning air dried seasoned hardwoods, as compared to softwoods or to green or freshly cut
hardwoods. Do not start a fire with chemicals or fluids such as gasoline, engine oil, etc. Do
not burn treated wood, coal, charcoal, coloured paper, cardboard, solvents or garbage. Do
not let the fireplace become hot enough for any part to glow red.