Filter
Top Products
W415-0156 / A / 04.09.03
8
FIGURE 11 - 4 ELBOWSFIGURE 10 - 2 ELBOWSFIGURE 9 - STRAIGHT UP
No Off-Set. Minimum overall chim-
ney height is 11 feet.
Single off-set with two 15°, 30° or
45° elbows. Minimum overall
chimney height is 11 feet.
Double off-set with four 15°, 30° or
45° elbows. Minimum overall chim-
ney height is 11 feet.
This fireplace was tested to CAN/ULC S610 and UL 127 Zero Clearance Fireplace Safety Test Standard. In Canada, in
accordance with these standards, the unit may be connected to any accepted chimney listed to ULC-S629. The following
6" factory-built chimney systems may be used:
Installation of all types of factory-built chimney systems is to be in accordance with the chimney manufacturers installa-
tion instructions. An appropriate chimney manufacturers anchor base plate and anchor base plate gasket is required in
order to initiate the twist lock mechanism. Use the high temperature gasket, supplied, to seal between the anchor plate
and the fireplace top. Air cooled chimney systems are not recommended in colder climates.
OLIVER MACLEOD HT 6103(
FORMERLY HT3103) 4 - 45
O
4 - 30
O
HT 6103(FORMERLY HT3103)
SECURITY ASHT 4 - 45
O
4 - 30
O
ASHT
ICC EXCEL 2100-2 4 - 45
O
4 - 30
O
EXCEL HT
ENERGY VENT HT5103 4 - 45
O
4 - 30
O
HT5103
GSW FC 2 - 45
O
& 2-15
O
4 - 30
O
SC
SELKIRK METALBESTOS SS PLUS 2 - 45
O
2 - 30
O
SS II
AMERICAN METAL --- --- 4 - 30
O
HS
SIMPSON DURAVENT --- --- 4 - 30
O
DURA CHIMNEY
SIMPSON DURAVENT --- --- 2 - 30
O
DURA PLUS
IN CANADA (ULC S610):
IN U.S.A. (UL 127):
(45
o
MAX.)
MAXIMUM # OF OFFSETSMODEL #
MANUFACTURER
(30
o
MAX.)
MODEL #
*
*
* The first flue offset closest to the top of the
unit must be a minimum distance of 12 inches
from the top of the fireplace.
NOTE: 30° or 45° offsets may be installed back to back.