Filter
Top Products
10
Ⅲ RINSE – PRESS DRAW-OFF KEY
Ⅲ Place a cup under the coffee spout and press one of the draw-off
keys (SMALLCUP or LARGECUP).
Ⅲ RINSING
Ⅲ READY
8. Drawing off espresso
Ⅲ Use the ON/OFF key to switch on the machine.
Ⅲ MACHINE HEATING
Ⅲ RINSE – PRESS DRAW-OFF KEY
Ⅲ Place a cup under the coffee spout and press one of the draw-off
keys (SMALLCUP or LARGECUP).
Ⅲ RINSING
Ⅲ READY
Ⅲ Open the cover and install a capsule (Fig. 5).
Ⅲ COVER / CLOSE
Ⅲ Close the cover again.
Ⅲ READY
Ⅲ Place a cup under the coffee spout and press the required draw-
off key (SMALLCUP or LARGECUP).
Ⅲ SMALLCUP or LARGECUP
Ⅲ Your product is being prepared.
Ⅲ EJECT CAPSULE
Ⅲ Open the cover. The capsule is ejected.
Ⅲ COVER / CLOSE
Ⅲ Close the cover again.
Ⅲ READY
You can stop the draw-off operation at any time by pressing
any key.
9. Drawing off hot water
You can adjust the water portion individually (see Chapter
15.4). Install the hot water jet (Fig. 6) to obtain perfect water
flow..
During operation, the hot water / steam jet may heat up.
However, there is no danger of burns.
At the start of the water draw-off there can be splashing
Avoid direct contact with the skin!
Do not replace the replaceable hot water jet directly after
drawing off water, because the jet is hot after the draw-off
operation.
Ⅲ Use the ON/OFF key to switch on the machine.
Ⅲ MACHINE HEATING
Ⅲ RINSE – PRESS DRAW-OFF KEY
Ⅲ Place a cup under the coffee spout and press one of the draw-off
keys (SMALLCUP or LARGECUP).
Ⅲ RINSING
Ⅲ READY
Ⅲ Place a cup under the hot water jet.
Ⅲ Turn the hot water / steam valve to Hot Water / Steam (Fig. 4).
Ⅲ WATER / PORTION
Ⅲ The programmed portion is being prepared..
Ⅲ VALVE /CLOSE
Ⅲ Turn back the hot water / steam valve to Coffee (Fig. 3).
Ⅲ READY
You can stop the water draw-off operation by turning the hot
water / steam valve to Coffee (Fig. 3).