Filter
Top Products
13
15.3 Programming the steam portion
Ⅲ Use the ON/OFF key to switch on the machine.
Ⅲ MACHINE HEATING
Ⅲ RINSE – PRESS DRAW-OFF KEY
Ⅲ Place a cup under the coffee spout and press one of the draw-off
keys (SMALLCUP or LARGECUP).
Ⅲ RINSING
Ⅲ READY
Ⅲ Press the programming key until the machine switches over to
programming mode.
Ⅲ FILTER
Ⅲ Press the arrow keys a number of times until the following
message appears:
Ⅲ STEAM
Ⅲ Press the programming key to activate the programming step.
Ⅲ 20 SEC.
Ⅲ Use the arrow keys to adjust the seconds.
Ⅲ Press programming key to confirm your settings.
Ⅲ STEAM
Ⅲ Use the arrow keys to activate the next programming level or
press the arrow keys until the following message is displayed:
Ⅲ EXIT
Ⅲ Press the programming key to quit the programming mode.
15.4 Programming the water portion
Ⅲ Use the ON/OFF key to switch on the machine.
Ⅲ MACHINE HEATING
Ⅲ RINSE – PRESS DRAW-OFF KEY
Ⅲ Place a cup under the coffee spout and press one of the draw-off
keys (SMALLCUP or LARGECUP).
Ⅲ RINSING
Ⅲ READY
Ⅲ Press the programming key until the machine switches over to
programming mode.
Ⅲ FILTER
Ⅲ Press the arrow keys a number of times until the following
message appears:
Ⅲ WATER
Ⅲ Press the programming key to activate the programming step.
Ⅲ VALVE / OPEN
Ⅲ Turn the hot water / steam valve to Hot Water / Steam (Fig. 4).
Ⅲ ENOUGH / WATER?
Ⅲ When the required water quantity is drawn off, turn back the hot
water / steam valve to Coffee position (Fig. 3).
Ⅲ WATER
Ⅲ Press the arrow keys a number of times until the following
message appears:
Ⅲ EXIT
Ⅲ Press the programming key to quit the programming mode.
Ⅲ READY
15.5 Programming the time
You must programme the time if you want to use the auto-
matic switch-on function.
Ⅲ Use the ON/OFF key to switch on the machine.
Ⅲ MACHINE HEATING
Ⅲ RINSE – PRESS DRAW-OFF KEY
Ⅲ Place a cup under the coffee spout and press one of the draw-off
keys (SMALLCUP or LARGECUP).
Ⅲ RINSING
E