Nostalgia Electrics MHP-310 Popcorn Poppers User Manual


 
ENGLISH 2
IMPORTANT SAFEGUARDS (Continued)
6. DO NOT operate any appliance with a damaged cord or plug, or if the appliance has
been damaged in any manner. Return appliance to the nearest repair shop for
examination and repair or send back to company per warranty in this book.
7. The use of accessory attachments is not recommended by the appliance
manufacturer. These may cause injuries.
8. DO NOT use outdoors.
9. DO NOT let the cord hang over edge of table or counter, or touch hot surfaces.
10. DO NOT place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving the appliance.
12. DO NOT use appliance for anything other than intended use.
13. A popper that is plugged into an outlet should not be left unattended.
14. Extreme caution must be used when unloading popcorn.
15. A short power supply cord is provided to reduce the risk resulting from becoming
entangled or tripping over a long cord.
16. Longer detachable power supply cords can be used if care is exercised in their use.
17. The marked electrical rating of an extension cord should be at least as great as the
electrical rating of the appliance.
18. Do not leave unit power on without any popcorn kernels inside. This may result in the
melting of the plastic cover.
Save These Instructions!
INTRODUCTION
Thank you for purchasing the MINI MOVIETIME HOT AIR POPPER™. This popcorn
maker will provide your friends and family with delicious popcorn anytime!
The MINI MOVIETIME HOT AIR POPPERis a technologically advanced hot air popcorn
popper that pops more kernels than many other popcorn makers.
This convenient tabletop-size electric popcorn popper uses air instead of oil, producing
perfectly popped popcorn with less kernels to bite into. Air-popped popcorn is a deliciously
healthy low-fat snack.
INSTRUCTIONS FOR USE
The MINI MOVIETIME HOT AIR POPPER™ is easy to use. Just follow these simple
instructions.
After Taking the Unit Out of the Box
Your MINI MOVIETIME HOT AIR POPPER™ is already fully assembled. Before
first use, lift the top housing off of the main body and wipe clean the inside of the
unit with a non-abrasive moist sponge or a non-abrasive moist towel. Wipe dry
with a non-abrasive towel.
After cleaning the inside, put the top housing back onto the base.