Filter
Top Products
OPTIONAL MOUNTING METHODS
The mounting brackets may be adjusted and/or moved for various types of installation.
To adjust bracket position, loosen
7
⁄
16
" hex nuts and
move brackets up or down. Re-tighten hex nuts securely.
To move brackets, remove
7
⁄
16
" hex nuts. Re-position
brackets on different set of slots. Replace hex nuts and
tighten securely.
Reverse brackets to allow approximately 1" of additional
clearance space. remove hex nuts, flip brackets over and
replace hex nuts. Tighten nuts securely.
For in-line installation, remove
7
⁄
16
" hex nuts. Re-position
brackets so that the housing's opening is at the side
instead of the bottom.
MOUNTING BRACKETS LOCATED
ON EACH SIDE OF THE HOUSING
ARE ADJUSTABLE TO ALLOW FOR
VARIOUS CEILING THICKNESSES
13
3
⁄
16
" MINIMUM
TO
14
3
⁄
16
" MAXIMUM
1
7
⁄
16
"MINIMUM
TO
2
7
⁄
16
" MAXIMUM
12" MINIMUM
TO
13" MAXIMUM
INSTALLATION IN
METAL CEILING JOISTS
1
1
⁄
4
" MAXIMUM