Filter
Top Products
~4~
~5~
Use allen key provided or
#3 phillips screwdriver.
Attach TOP and Bottom to
Back by CAREFULLY aligning
edge holes over Cam Pins
and gently push together to
avoid damaging cam pins. DO
NOT BANG OR SLAP PANELS
TOGETHER!!!
Insert Cam, push all the way
in under panel level (may
require some force) and
make sure Arrow points to
outside edge.
Gently push down to bring
panels together before you
tighten the Cam. Start with
cams at each end.
Cam Arrow faces away from
outside edge when tightened.
STEP 2 : CABINET ASSEMBLY
1
2
CAM in LOCKED
POSITION
PANEL EDGE
COUPLER BAR
INSIDE
CABINET
2
3
Insert Center COUPLER
BAR by guiding edge
holes over bottom
Cam Pins. Lightly push
out top panel edge to
allow Cam Pins to go in
Coupler Bar. Insert and
tighten Cams.
3
BOTTOM PANEL
BOTTOM PANEL
METAL
METAL