Filter
Top Products
~6~
~7~
Insert Cam Cap (A) in
all Cam Holes.
3
STEP 2 : CABINET ASSEMBLY CONTINUED
TOP !!!
Open Box VP5 or VP2.
Insert Cam Pins (F) in BACK PANEL’S predrilled holes down
to TAB. (May require some force)
Attach SIDES to Back/Bottom/Top by CAREFULLY aligning
edge holes over Cam Pins and gently push together to
avoid damaging cam pins. DO NOT BANG OR SLAP PANELS
TOGETHER!!!
Insert Cam, push all the way in under panel level (may
require some force) and make sure Arrow points to outside
edge., Push Panels together before tightening Cam, use allen
key provided or #3 phillips screwdriver. Start with cams at
1
2
3
A
F
BOTTOM PANEL
2 HOLES FOR MODEL 250
3 HOLES FOR MODEL 500