OK International TS250 Water Dispenser User Manual


 
3
being sucked back into the unit. Also do not overfill the barrel and to lay the
barrel on its side
Do not smoke or use open flame when flammable materials are being dispensed
This equipment is for indoor use only
2 SYMBOL DEFINITIONS
Symbol Definition
Power On/Off
Cycle Mode
Timer
Vacuum
Pressure
3 SPECIFICATIONS
Size
152mm X 165mm X 178mm
(6” X 6.5” X 7.0”)
Weight 1.2 kg (2.6lbs)
Input Voltage 24 VDC
Rated Power 10 W
Air Input 100 psi (6.9 bar) Max.
Pollution Degree II
Installation Category I
Indoor Use Altitude up to 2,000m (6,562ft)
Operating Temperature 0˚C to 50˚C (32˚F to 122˚F)
Storage Temperature -10˚C to 60˚C (14˚F to 140˚F)
Max. Relative Humidity
80% for temperature up to 31˚C (87.8˚F) Decreasing
linearly to 50% relative humility at 40˚C (104˚F)
Air Output
TS250 = 0-100 psi (0- 6.9 bar)
TS255 = 0-15 psi (0-1 bar)
Vacuum 406mm (16”) of Hg
Timer 0.020-60.000 seconds
Cycle Mode PURGE, TIMED
Timing Repeat Tolerance +/- 0.001%
Cycle Rate 600 cycles/min
LCD 16 X 2 display segments
4
4 FEATURES
Figure 1.0
Items Description
1
Power Button
2
Mode Button
3
Counter Reset Button
4
Display
5
Air Pressure Gauge
6
Air Pressure Regulator
7
Pulsed Air Outlet
8
Vacuum Control
9
Time Control Knob
10
Receiver head air hose holder
11
Foot Switch Receptacle
12
Power Receptacle
13
I/O Connection
14
Exhaust Port
15
Air Inlet
16
Cord Lock
1
7
6
5
3
4
15
16
14
11
12
9
2
10
8
13