Filter
Top Products
BLENDER OPERATION
To operate the blender, proceed as follows
1. For the first time user, wash the container assembly, including the lid, before using it. (Refer
to "Cleaning Instruction") Do not put the container assembly & blender base assembly in the
dishwasher.
2. Place the blender on a dry, clean, level surface,
and press OFF.
3. Place the container onto the blender base. Make
sure it rests securely on the base.
4. Plug the blender into an electric outlet.
5. Place the ingredients into the container.
4. Place the lid and feeder cap tightly on the container.
7. Press On (On/Off Switch).
8. Select desired speed and time by rotating dials.
9. Press Start.
NOTES
Pulse Button – Pressing the pulse button will cause the motor to run for as long as the button
is depressed. Removing your finger from the button will cause the motor to stop running and
the knife to stop turning.
Infinity Button – Pressing this button will cause the motor to run at alternating RPM until the
timer expires to thoroughly blend most mixtures.
PROFESSIONAL BLENDER TIP
1.Processing hot liquid
mAlways cover the lid and feeder cap before blending hot liquid or mixture.
mUse the feeder cap to add liquids to the container while the unit is running.
mNever stand with your face directly over the container when you are putting ingredient
through the feeder cap.
2.Blending Icy mixtures
mSteps for blending ice:
Pour in liquid, and then add ice.
Place the lid.
Set to desired speed
Chunks of frozen fruit can be added to milk or fruit juice to
produce a sherbet or slush.
Use the feeder cap to add liquids or ingredients to the container
while the unit is running.