Oster TSSTTVDFL1 Oven User Manual


  Open as PDF
of 43
 
English-16
using the Warm Function (see Fig. 9)
Step 1. TurntheFunctionKnobtotheWarmfunction.
WhenyouselecttheWarmfunction,thelower
heating element will heat.
Default Temperature: 150ºF.
Default Time: 60 minutes.
YoumaymanuallyactivatetheTurbo
ConvectionHeatbypressingtheTurbo
button once to turn it on. The blue light of
the Turbo button will turn on.
Step 2. To set the temperature:
Turn the Temperature Knob if you wish to
increase or decrease the temperature setting.
FortheWarmFunction,thetemperature
can be set from 150 to 200ºF in 25-degree
increments.
Step 3. To set the time:
Turn the Time Knob if you wish to
increase or decrease the warming time.
ThemaximumtimesettingforWarmis60
minutes(1hour).Onceyouhaveselected
the desired warming time, press the Start
button to initiate the warming process.
Step 4. To Start:
PresstheStart/CancelButtontostartthe
warmingprocess.TheredStart/Cancel
Buttonlightwillilluminate.TheLCD
DisplaywillshowtheWarmFunction,
the countdown time and the selected
temperature. The unit will begin to work
and the timer will start counting down.
WhentheWarmingcycleiscomplete,the
unitwillemit3beeps.TheLCDandthe
Start/CancelButtonLightwillturnoffafter
30 seconds.
NOTE:Youcancancelthewarmingcycleatanytime
bypressingtheStart/CancelButtononce.The
redStart/CancelButtonlightwillturnoff
whenever a function has been completed or a
function is manually cancelled.
Figure 9
 previous next