Oster TSSTTVDFL1 Oven User Manual


  Open as PDF
of 43
 
English-18
using the reheat Function (see Fig. 11)
Step 1. TurntheFunctionKnobtotheReheat
function.
Default Temperature: 325ºF.
Default Time: 15 minutes.
YoumaymanuallyactivatetheTurbo
ConvectionHeatbypressingtheTurbo
button once to turn it on. The blue light of
the Turbo button will turn on.
Step 2. To set the temperature:
Turn the Temperature Knob if you wish to
increase or decrease the temperature setting.
FortheReheatfunction,thetemperature
can be set from 150 to 450ºF in 5-degree
increments.
Step 3. To set the time:
Turn the Time Knob if you wish to increase
or decrease the reheating time. The maximum
timesettingforReheatis60minutes(1hour).
Once you have selected the desired reheating
time, press the Start button to initiate the
reheating process.
Step 4. To Start:
PresstheStart/CancelButtontostartthe
reheatingprocess.TheredStart/Cancel
Buttonlightwillilluminate.TheLCD
DisplaywillshowtheReheatFunction,
the countdown time and the selected
temperature. The unit will begin to work
and the timer will start counting down.
WhentheReheatingcycleiscomplete,the
unitwillemit3beeps.TheLCDandthe
Start/CancelButtonLightwillturnoffafter
30 seconds.
NOTE:Youcancancelthereheatingcycleatany
timebypressingtheStart/CancelButton
once.TheredStart/CancelButtonlight
will turn off whenever a function has
been completed or a function is manually
cancelled.
Figure 11
 previous next