Panasonic FV-08vsl2 Ventilation Hood User Manual


 
FV-08VSL2 FV-10VSL2
SUPPLIED ACCESSORIES
Part name Part nameAppearance AppearanceQuantity Quantity
Grille
Suspension
bracket
Suspension
bracket
Suspension
bracket
Screw
(ST4.2X8)
Screw
(ST4.2X12)
1
1
1
1
2
2
Screw
(ST4.2X16)
Machine screw
(M4X8)
Long screw
(ST4.2X20)
32W
Fluorescent
lamp
4W
Night lamp
Lighting unit
2
2
6
1
1
1
UNPACKING
Unpack and carefully remove unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.
4
DESCRIPTION
These products are listed by UL under UL file No. E78414.
These products use a sirocco fan driven by a capacitor motor. The motor is designed to have an extended
service life with reduced energy consumption. lt also incorporates a thermal-cutoff for safety.
The grille covering the main body is a spring-loaded, quick-release type.
A damper for preventing counterflow is provided.
The lighting unit is an energy-saving lighting device which uses one 32W fluorescent lamp and produces
almost the same illumination as a standard 100W incandescent lamp.
This product contains electronic ballast with one fluorescent lamp and is in compliance with Part 18 of
the FCC rules as consumer RF lighting device. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired
operation.
This product may cause interference to radio equipment and should not be installed near maritime safety
communications equipment or other critical navigation or communication equipment operating between
0.45-30 MHz. lf interference should occur, try to increase spacing between this product and the other
product.
Doc Responsible Party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Sales Company: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Customer Call Support: 1-866-292-7292