Filter
Top Products
9
NN-T664SF/SN657S
Control Panel
Start Pad
One tap allows oven to begin
functioning. If door is opened
or Stop/Reset Pad is pressed
once during oven operation,
Start Pad must be pressed
again to restart oven.
Stop/Reset Pad
Before cooking: One tap clears memory.
During cooking: One tap temporarily
stops the cooking process. Another tap
cancels all your instructions and time of
day or colon appears in the Display
Window.
Sensor Cook Pads
(☛ page 15)
Beverages Pad
(☛ page 12)
Keep Warm Pad
(☛ page 11)
Sensor Reheat Pad
(☛ page 15)
Display Window
Popcorn Pad (☛ page 12)
Power Level Pad
(☛ page 11)
Inverter Turbo Defrost Pad
(☛ page 13)
Timer Pad (☛ page 18)
Quick Min Pad (☛ page 11)
More/Less Pad
(☛ page 12)
Clock Pad (☛ page 10)
Number Pads
Beep Sound:
When a pad is pressed correctly, a beep will be heard.
If a pad is pressed and no beep is heard, the unit did not or cannot accept the instruction.
When operating, the oven will beep twice between programmed stages. At the end of any
complete program, the oven will beep 5 times.
Note:
If an operation is set and Start Pad is not pressed, after 6 minutes, the oven will automat-
ically cancel the operation. The display will revert back to clock or colon mode.
IP0909_38M40AP_08_070323 2007.3.23 09:29 Page 11