Filter
Top Products
User instructions
12
3.2 Washing programmes
Before starting a washing program make sure that:
• The water supply tap/valve is open.
• The correct amount of detergent has been added to the
dispenser.
• The baskets have been correctly loaded.
• The spray arms are able to rotate freely and without
obstruction.
• The dishwasher door is securely closed.
SPEED
PROGRAM
ME
S
Select this option together with any washing program (except the soak program)
to SHORTEN the cycle by from a minimum of 10% to a maximum of 55%,
depending on the cycle selected. To activate this option, press the SPEED button
(light comes on) after selecting the program required. The option is
automatically deactivated at the end of the program.
ENER
GY
SAVE
This option can be selected with the wash programme of choice to
further reduce energy consumption. Drying is aided by a special
device that automatically releases the door, which opens slowly and
smoothly by a few centimetres. This ensures perfect drying and greater
control of rinsing temperatures, which can be kept at lower levels for
significant energy saving.
Once the door has opened, the dishwasher
emits a short beep and programme lights
nos. 5 and 6 flash to indicate the end of the
washing cycle.
Energy save
is activated
automatically every time
a wash cycle is
selected (except for programmes that do not include the final drying
phase; see the programmes table) and can be disabled before the
program is started.
When the function is activated, opening of the door must not be
impeded in any way; do not leave anything in the space in front of the
door necessary to allow it to open.
Do not re-close the door during automatic opening as this would
damage the mechanism. Wait for the pushers to retract before re-closing
the door.