Filter
Top Products
6 C2237M (1/08)
Installation
CEILING MOUNT
Figure 1. Ceiling Mount Installation
To install the mount to a ceiling refer to Figure 1, and then complete the following steps:
1. Pull the wire and cable for the camera through the mounting plate, and then attach the mounting
plate to the mounting surface (hardware not supplied).
2. Attach the ball socket to the threaded stud on the mounting plate.
3. Attach the camera to the 1/4-20 threaded stud on the ball socket, and then tighten the adjustment
ring, and then tighten the adjustment ring.
4. Use an 1/8-inch Allen wrench (not provided) to loosen the set screw on the ball socket to position
the camera, and then retighten the set screw.