Filter
Top Products
24”
[610]
24”
[610]
24”
[610]
36” [914]
48” [1219]
60” [1524]
72” [1829]
96” [2436]
2”
[50]
2”
[50]
2”
[50]
2”
[50]
2”
[50]
2”
[50]
2”
[50]
2”
[50]
34 1/4”
[870]
34 1/4”
[870]
19 1/16”
[485]
INSIDE
17 3/16”
[437]
HOUSING
STEP
27 7/8”
[708]
INSIDE
11 5/8”
[295]
11 5/8”
[295]
END VIEW
24” CABINET
FRONT VIEW
24” CABINET
END VIEW
36”, 48”, 60”, 72” & 96”
CABINETS
FRONT VIEW
36”, 48”, 60”, 72” & 96”
CABINETS
BLACK BC24PG BC36PG BC48PG BC60PG BC72PG BC96PG
STAINLESS EXTERIOR BC24SG BC36SG BC48SG BC60SG BC72SG BC96SG
STAINLESS INTERIOR BC24SS BC36SS BC48SS BC60SS BC72SS BC96SS
ALL STAINLESS BC24AS BC36AS BC48AS BC60AS BC72AS BC96AS
MODEL NUMBERS
LENGTH (mm) 24” (610) 36” (915) 48” (1219) 60” (1524) 72” (1828) 96” (2438)
INTERIOR CU. FT. (m
3
) 3.75 (0.10) 7.83 (0.22) 11.68 (0.33) 15.53 (0.44) 19.38 (0.55) 27.08 (0.77)
CASE CAPACITY (12oz. bottles) 5.5 9.75 17.2 21 28.3 41
CASE CAPACITY (12oz. cans) 7 16 25 30 36 58
NUMBER OF BINS 2 2 3 4 5 7
CONDENSING UNIT H.P.
1
⁄5
1
⁄5
1
⁄4
1
⁄3
1
⁄3
1
⁄3
AMPS 3.2 3.0 5.2 7.0 6.9 7.6
SHIP WT lbs. (kg) 190 (86) 245 (111) 300 (136) 353 (160) 405 (184) 515 (235)
INTERIOR Black and Stainless Exterior Models (PG & SG): Walls are galvanized steel. Floors are stainless steel.
Stainless Interior and All Stainless Models (SS & AS): Walls and floor are stainless steel.
All Models: Adjustable vinyl coated wire partitions.
EXTERIOR Black Model: Front and ends are 20 gauge, black vinyl coated steel. Back is galvanized steel.
Bottom is galvanized steel.
Stainless Exterior and Stainless Interior Models: Front and ends are stainless steel. Back is galvanized steel.
Bottom is galvanized steel.
All Stainless Models: Front, ends, back and bottom are stainless steel.
All Models: Top is stainless steel. Aluminum front and back grilles and stainless steel cap receivers.
DOORS (Sliding) Stainless steel top and door pan with ABS plastic frame and integral handle. Includes door locks.
ELECTRICAL 115V, 60 Hz., 1 Phase. Furnished with 6 foot rubber plug-in cord (115V model only). Also available in 230V, 50Hz.,
1 Phase AC. Carries marking of conformity.
PLUMBING No drain required. Condensate evaporates automatically.
INSULATION 2 inch foamed-in-place polyurethane insulation.
REFRIGERATION R134a capillary tube/type with hermetic condensing unit. Pulls out for service and cleaning.
VENTILATION 2’ model is front vented, all other models require 2” clearance from wall on either left end or back of cabinet
for proper air flow.
OPTIONALACCESSORIES • Floor racks • Casters • Additional opener and receiver
• Additional partitions • Bottle rails
• Interior light kit • Adjustable legs
SPECIFICATIONS
2
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
Installation and Operating Instructions
Sizes and Specifications, Flat Top Bottle Coolers
Form No. Z2219
Rev. 4.15.06