Perlick DS32 Beverage Dispenser User Manual


 
Form No. Z2280
2
Installation and Operating Instructions
Sizes and Specifications, Direct Draw Dispensers - Self-Contained
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
84” [2134] 4 KEG
72” [1829] 3 KEG
60” [1219] 2 KEG
6 5/16 [161]
24 3/4
[629]
12 11/16
[322]
10 9/16
[268]
1 1/8
[29]
3 11/16
[94]
NOTE A
3 1/8
[79]
31 1/4
[794]
DOOR
HEIGHT
27 7/16
[697]
DOOR
OPENING
34 1/2
[876]
4 1/4
[107]
R23 1/2
NOTE B
NOTE A: 3/4 NPT DRAIN EXIT
NOTE B: 1 NPS DRAIN ACCESS
23 1/2
[597]
19 7/8
[505]
DOOR
OPENING
18 3/4 [476]
BACK LINER
TO INSIDE OF
DOOR SILL
68 [1726] 4 KEG
56 [1492] 3 KEG
44 [1118] 2 KEG
KEG KEG
KEG
KEG CAPACITY 2 Keg 3 Keg 4 Keg
NUMBER OF DOORS 2 2 3
CABINET Length Ins. (mm) 60” (1524) 72” (1829) 84” (2134)
DIMENSIONS Depth Ins. (mm) 24
3
/4” (629) 24
3
/4” (629) 24
3
/4” (629)
Height Ins. (mm) 34
1
/2” (876) 34
1
/2” (876) 34
1
/2” (876)
NO. OF DISPENSING HEADS 1 1 2
NO. FAUCETS 2 2 2
CONDENSER UNIT H.P.
1
/4
1
/3
1
/3
RUNNING LOAD - AMPS 5.9 7.5 7.5
SHIP WT lbs. (kg) 385 [175] 425 [193] 500 [227]
INTERIOR Door sill: High strength polyethylene. Door pan and ceiling: High strength polystyrene.
Floor pan: Satinless steel. Walls: Galvanized steel.
EXTERIOR All Models: The top is 20 gauge stainless steel. The back, front and sides are stainless steel.
Bottom is 18 gauge galvanized steel.
Black Models: Doors and grilles are black vinyl coated steel.
Stainless Models: Doors and grilles are stainless steel.
REFRIGERATION R-134a capillary tube-type. Aluminum fin and copper tube evaporator, epoxy coated coil. Forced air
into dispensing head. Adjustable temperature control. Self-defrosting. Pull-out condensing unit for
service and cleaning.
VENTILATION Front ventilated.
ELECTRICAL 115 Volt, 60 Hz., 1 Phase AC. Furnished with three prong, six foot NEMA5-15P cord.
Contact Perlick for other voltage/frequency requirements.
PLUMBING
3
/4” NPT drain exits out right end or 1” NPS out bottom. Evaporator condensate has been plumbed
to a condensate pan located in the compressor housing.
INSULATION Foamed-in-place polyurethane; 2” walls, 1
1
/2” top and floor.
OPTIONAL ACCESSORIES • Optional Dispensing Heads • Leg Set • Keg Couplers
• Caster Sets • Shelf Kit • Faucet Locks
DOOR FINISH MODEL NUMBERS
SPECIFICATIONS
BLACK DS60B DS72B DS84B
STAINLESS STEEL DS60S DS72S DS84S