Philips HD4686 Hot Beverage Maker User Manual


  Open as PDF
of 160
 
A Keeping water warm at the current temperature
1 PresstheKEEPWARMbutton(Fig.12).
Note: If the current temperature is lower than 60°C, you rst have to set the
temperature (see point B below).
B Keeping water warm at a higher temperature than the
current temperature
1 PresstheSETTEMPbuttononeormoretimestosetthedesired
temperature(seesection‘Settingthetemperature’).
2 PresstheKEEPWARMbutton(Fig.12).
3 Presstheon/offbutton.
ThelightringroundtheKEEPWARMbuttonandtheon/offbutton
goontoindicatethattheKEEPWARMfunctionis
activated(Fig.13).
2 Thekettlekeepsthewaterwarmfor30minutes.
Whenthekettleheatsupthewatertokeepitattheselected
temperature,thelightofthedesiredtemperatureashes.Whenthe
waterhasreachedtheselectedtemperature,thelightofthedesired
temperaturelightsupcontinuously.
After30minutes,youhearanaudiblesignalandthekettleswitches
offautomatically.
Note: You can always stop the keep-warm process at any time. To do so, press
the KEEP WARM button or the on/off button or remove the kettle from the
base.
Note: If you remove the kettle from the base, the set keep-warm temperature
is lost.
Note: If the selected keep-warm temperature is 100°C, the kettle keeps the
water at a temperature between 90°C and 100°C to avoid excessive steam
development. If the selected keep-warm temperature is 80°, 60° or 40°C, the
kettle keeps the water at a temperature between 5°C below and 5°C above
the selected temperature.
,
,
ENGLISH 11
 previous next