Philips HD7811 Coffeemaker User Manual


 
IMPORTANT
SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
Read all instructions before using the appliance.
1. Do not touch hot surfaces. Use handles or knobs. Care must be
taken to prevent burns which can occur from touching hot parts
or spilling hot liquids.
2.To protect against fire, electrical shock and injury to persons, do
not immerse cord, plug, or appliance in water or other liquid.
3. Close supervision is necessary when any appliance is used by or
near children.
4. Unplug from outlet when not in use and before cleaning. Allow to
cool before putting on or taking off parts and before cleaning
appliance.
5. Do not operate this appliance with a damaged cord or plug, or
after the appliance malfunctions or has been damaged in any
manner. Return the Coffee Machine to the nearest Authorized
Norelco Service Location for examination, repair or adjustment.
6. Use this appliance only for its intended purpose as described in
this manual. Do not use accessory attachments not recommended
by Philips Electronics North America Corporation as they may
result in fire, electric shock or injury to persons.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter or touch hot
surfaces. Operate on a flat, stable surface away from edge of
counter to prevent accidental tipping.
9. Do not place Coffee Machine on or near a hot gas or electric
burner, or in a microwave or heated oven.
10.This appliance is intended for household use ONLY; it is not for
commercial or industrial use.
11. Any service to the Coffee Machine should be performed by the
nearest Authorized Norelco Service Location.
12.To disconnect Coffee Machine, press power button (I) to ‘OFF’,
then remove plug from electrical outlet. Remove plug by gripping
plug body and pulling it from the outlet. Never yank or twist cord
to unplug.
13. Do not use Coffee Machine if lid has a cracked, loose, weakened
or damaged lever.
14.This appliance does not work at temperatures below 50ºF/10ºC.