Filter
Top Products
9 Do not use an object with sharp edges to clean the water inlet on
the machine.
10 Rinse the parts with fresh water after cleaning and put them back
into the machine.
11 Clean the water distribution disc with a moist cloth.
Be careful when you do this; make sure that the rubber sealing ring does
not get stuck under the edge of the water distribution disc. If it does, the
coffee machine will start leaking!
Flushing
Ifyouhavenotusedthecoffeemachineforthreedays,youhavetoushit
with fresh water before you use it again.
Flush the machine in the following way:
1 Fill the water reservoir with cold water up to the MAX indication
and put it back into the machine.
2 Put the 1-cup pod holder q or the 2-cup pod holder qq in the
machine without pod(s).
3 Close the lid and lock the lever.
4 Put a bowl (with a capacity of at least 1.6 qt./1.5 litres) under the
coffee spout to collect the water.
14