Filter
Top Products
ENGLISH
13
2
Turn the control dial to the “ ” position and wait few seconds.
3
When water steadily comes out and the “ “ light ashes slowly, turn the
control dial back to the “
” position. The machine is in warm-up mode
(light “
“ ashes slowly).
Automatic rinse/self-cleaning cycle
When warm-up is complete, the machine automatically performs a rinse/
self- cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
1
Place the container under the dispensing spout to catch the small
amount of water which will be dispensed.
2
The indicator lights ash counter clock wise.
3
Wait for the cycle to nish automatically.
Note:
You can stop dispensing, by pressing either “
“ or “ “ button.
4
Wait for the water dispensing to stop. The “ “ light is now shining stea-
dily.
Flashing