Filter
Top Products
34
ENGLISH
10
When the green “ ” light starts ashing slowly, turn the control
dial to the “
” position. The red “ ” light turns on.
11
Empty the large container and the drip tray and place them back.
Rinsing Cycle 1
12
Rinse the water tank and ll it up to the MAX level with fresh water.
Put it back in the machine.
13
When the green “ ” light turns on, turn the control dial to the “
” position. The machine will prime its internal circuits.
14
After this, the green “ ” light starts ashing slowly. Turn the
control dial to the “
” position.
15
The machine dispenses water internally in the drip tray. It does not
dispense through the hot water/steam wand.
16
When the green“ ” light turns on, turn the control dial to the “
” position. The machine now dispenses through the hot water/
steam wand until the water tank is empty.
Note:
If you want to stop dispensing (for example to empty the container), turn
the control dial to the “
” position. To restart dispensing, turn the control
dial back to the “
” position.