Philips HR1741 Blender User Manual


 
Do not use the appliance if the mains cord, the plug or other parts are damaged.
If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid a hazard.
Never let the appliance run unattended.
Never switch the appliance on or off by turning the accessories.
Do not exceed the maximum level indicated on the accessories.
Do not exceed the quantities and preparation times recommended at the recipes.
Always make sure the lid is properly closed and the stopper has been properly inserted into
the lid before you switch the appliance on.
To avoid leakage, always make sure the rubber sealing ring has been correctly placed before
you start using the blender.
To reduce the risk of injury, never place the blade unit onto the motor unit without having
attached the blender jar or mill beaker properly.
Avoid touching the blades, especially when the appliance is plugged in.The blades are very
sharp!
Always make sure that the blade unit is correctly assembled before you plug the appliance in
and switch it on.
If the blades get stuck, unplug the appliance before removing the ingredients that are blocking
the blades.
Blender
To avoid spillage, always make sure the lid is properly closed and the stopper has been
properly inserted into the lid before you switch the appliance on.
If the ingredients stick to the wall of the blender jar, switch the appliance off, unplug it and
loosen the ingredients from the wall with a spatula or by adding liquid.
The jar is made of glass and therefore breakable. Do not drop the jar on a hard floor.Also
avoid extreme thermal shocks. If the jar is very cold, rinse it well with lukewarm water
before pouring in hot liquid.
If the glass jar cracks, stop using it.
Filter
Do not use the filter to process hot ingredients.
Never overload the filter. Do not put more than 75g dried soy beans (unsoaked weight) or
150g fruit in the filter at the same time (see 'Recipes' ).
Before first use
Wash all accessories and detachable parts (see 'Cleaning').
Wind excess mains cord round the base of the appliance. (fig. 2)
Using the appliance
Blender
The blender is intended for:
- Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter or mayonnaise.
- Pureeing cooked ingredients, e.g. for making baby food.
Preparing the blender for use
1 Place the sealing ring in the blade unit. (fig. 3)
2 Mount the blender jar onto the blade unit and turn it in the direction of the arrow until it
locks into position.Always make sure that you place the jar onto the blade unit in such a way
that the level indications on the blender jar are in line with the ribs on the blade unit. (fig. 4)
3 Mount the blender jar with the blade unit attached to it onto the motor unit and turn it in
the direction of the arrow until it locks into position. (fig. 5)
ENGLISH 7