Filter
Top Products
The tap water is contaminated due to plumbing activities or cleaning
of the water tank.
When you use cloudy water immediately after heavy rain.
Cartridge replacement indicator
Tip: Remove the cover of the lter cartridge and stick the cartridge
replacement indicator to the inside of the cover. Check the colour of the
hollow bre of the lter cartridge through the cartridge window from time to
time. If the colour of the lter matches the rust brown or dark grey shown on
the cartridge replacement indicator, replace the lter cartridge (Fig. 27).
To help you determine when to replace the lter cartridge, the water
purier and each replacement lter cartridge comes with a self-adhesive
colour-coded cartridge replacement indicator. Place this replacement
indicator in a convenient place for future reference.
How to replace the lter cartridge
1 Close the tap and set the water selection lever to the unltered
stream position. (Fig. 22)
2 Tilt the used lter cartridge 90° backwards and pull it off the water
purier housing (Fig. 23).
3 Write down the replacement date on the information label of the
new cartridge.
4 Tilt the new lter cartridge 90° backwards and insert it into the
water purier housing.
5 Pull the cartridge upwards until it is in upright position. (Fig. 24)
Environment
Do not throw away the water purier with the normal household
waste at the end of its life, but hand it in at an ofcial collection point
for recycling. By doing this, you help to preserve the
environment (Fig. 28).
-
-
-
ENGLISH 13