Philips WP3890 Water Dispenser User Manual


  Open as PDF
of 80
 
11
D Note:
Leadacidgelbatterieslosecapacityiftheyare
notchargedregularly.Theperformanceand
functionalityofthebatterydependsdirectly
onthechargingpattern.Chargethebattery
regularlyandalwayschargethebatteryfully.
1 Pressthepower-onbutton.
During charging, the battery indicator z
ashes red.
When the battery is fully charged, the
battery indicator will switch off.
D Note:
Thepurewaterdispenserswitchestostandby
(powersaving)modeafter10minutesbutthe
batterycontinuestocharge.
6.1 Other functions
6.1.1 Audio on/off
The pure water dispenser is equipped with an
audible signal that reminds you that dispensing
is in progress. The default setting for this audible
signal is ‘off’. If desired, you can switch on the
audible signal.
1 PoweronthePureWaterDispenser.
Wait till the Dispense button LED starts

mode).
2 Pressthehold“MUSIC”button.


To Switch the audio OFF, press and hold the

D Note:
Toperformthisoperation,makesurethat
thePureWaterDispenserisintheManual
mode,andtheDispensebuttonLEDis
ashing(Readytodispense).
TheAudioON/OFFsettingwillchange
todefault(Factorysetting–“AUDIO
OFF”)whenthePureWaterDispenseris
poweredonnexttime.
•
•
•
•
6 Using the appliance
1 Openthetapconnectedtothepurewater
dispenser.
2 Whenyouusetheappliancefortherst
timeorifyouhavenotusedtheappliance
for2daysormore,usethePureFlush
function.Seesection‘PureFlush’inthis
chapter.
6.0.1 Purifying in manual mode
1 Pressthepower-onbuttononthepure
water dispenser
All indicators ash on and off.
The power-on indicator y goes on.
Only for model WP3891, the Battery LED
will be off, if the battery is fully charged and
AC supply is available. If battery is being
charged, it would blink red. If the Battery is
at critical stage the battery LED would blink
red, rapidly. In the absence of AC supply
when the battery is in use, the Battery LED
glows constant red.
The pure water dispenser checks the water
availability, the lter and the UV lamp.
As the purication process proceeds, rst
the red segment of the purication stage
indicator e lights up, followed by the yellow
segment. When the purication process
is nished (after 30 seconds), the green
segment lights up.
The dispense button d ashes.
2 Pressthedispensebuttond
The pure water dispenser dispenses water
and the dispense button lights up green.
3 Tostopthewaterow,pressthedispense
button
d again.
The dispense button ashes and the
appliance is ready to dispense again.
6.0.2 Charging the battery (type WP3891)
Charge the battery for 14 hours before you use

this, it takes 12 hours to charge the battery fully.
•
•
•
•
•
•
•
•
ENGLISH
 previous next