Philips WP3890 Water Dispenser User Manual


  Open as PDF
of 80
 
15
5 RemovetheUVlampunit(lamp,rubberseal
and lamp holder).
6 InsertthenewUVlampunit.
7 Reattach the lamp retaining cap.
8 Reconnect the wire connectors.
9 ClosethecoveroftheUVchamber.
7.0.7 Replacement items

items for this appliance, please contact the Philips
Customer Care Centre in your country or consult




original Philips UV lamp unit, code number
421530875020.
button.Keepbothbuttonspressed
simultaneouslyforatleast4seconds.
The pure water dispenser now
acknowledges the new lter.
The lter indicator c goes off.
D Note:
Ifthelterwarningstillpersists,repeat
step 2.
3 Placeacontainerwithacapacityofatleast
10 litres under the pure water dispenser.
The pure water dispenser automatically
performs the PureFlush procedure, during
which 10 litres of water ow out of the
appliance.
7.0.6 Replacing the UV lamp unit
B Warning:
AlwaysreplacetheUVlampunitwithanoriginal
PhilipsUVlamp(codeno.421530875020).
1 Switchoffthepurewaterdispenser.
2 RemovethecoveroftheUVchamber.
3 DisconnecttheUVlampwireconnectors.
4 UnscrewtheUVlampretainingcap.
•
•
•
ENGLISH
 previous next