25
3
FINGERPRINT ENABLE
5IJTGVODUJPOBMMPXTZPVUPBDUJWBUFBOEDIBOHFUIFöOHFSQSJOUGPSUIFVTFSTFMFDUJPO
Note: Before starting the Fingerprint Enable procedure make sure that the sensor is clean (see the "Cleaning and
Maintenance" section). Wash your hands thoroughly and make sure they are properly hydrated and not greasy. Do not use
your thumb.
ESC
OK
USER1
OFF
OFF
3.3.1. USER EDIT
EDIT NAME
FINGERPRINT ENABLE
NAME ENABLE
1
17/05/09
0%
PLEASE PUT FINGER
3.3.1. EDIT USER
2
17/05/09
33%
PLEASE PUT FINGER
3.3.1. EDIT USER
5
17/05/09
0%
PLEASE REMOVE FINGER
3.3.1. EDIT USER
4
17/05/09
33%
PLEASE REMOVE FINGER
3.3.1. EDIT USER
6
4FMFDUUIFGVODUJPOBOEQSFTTUIF0,
button.
The machine requests you to put your
öOHFSPOUIFTFOTPSUPQFSGPSNUIF
öSTUSFBEJOH
The machine requests you to put the
QSFWJPVTMZVTFEöOHFSPOUIFTFOTPS
to perform the second reading.
3FNPWFZPVSöOHFSGSPNUIFTFOTPS
XIFOSFRVFTUFE8BJU
3FNPWFZPVSöOHFSGSPNUIFTFOTPS
XIFOSFRVFTUFE8BJU
1VUZPVSöOHFSöSNMZPOUIFTFOTPS
Warning: Sometimes the system may not recognize or may have di culties in recognizing the user's ngerprints, in
particular if these are not well-de ned (dry skin or skin altered by natural causes) or damaged (e.g. by heavy manual
activities). This does not mean that the system does not work, but is due to its accuracy and precision, which do not
accept or process ngerprints without the minimum quality requirements.
Thanks to its precision, the system avoids improper ngerprint reading and prevents di erent users' ngerprints
reading from superimposing each other.
The machine will request you to put your nger on the sensor for three times in order to widen the ngerprint reading
area and improve the system reliability.