Filter
Top Products
En
11
Controlling the Serato DJ software
Checking the control signals
Press the play button on the connected player and play track 1.
Green ring appears at [CALIBRATION DECK].
Check that the innermost ring is close to a true circle.
For details, see the Serato DJ software manual.
The Serato DJ software manual can be downloaded from the Pioneer DJ support site
below.
See [Software Info] under [DJM-900SRT].
http://pioneerdj.com/support/
Selecting the play mode
The Serato DJ software provides three play modes that can be selected according to
your intended purpose.
[ABS], [REL] and [INT] can be selected on the deck unit.
Here we explain the procedure with the play mode set to [ABS] as an example.
Select [ABS] at the tab on the deck unit.
For a description of the respective play modes, see the Serato DJ software manual.
The Serato DJ software manual can be downloaded from the Pioneer DJ support site
below.
See [Software Info] under [DJM-900SRT].
http://pioneerdj.com/support/
Importing or loading tracks
Importing tracks
Here we explain a typical method of operation for importing tracks.
! There are various ways to import tracks with the Serato DJ software. For details,
see the Serato DJ software manual.
!
If you are already using Serato DJ software (Scratch Live, ITCH or Serato DJ
Intro) and have already created track libraries, the track libraries you have previ-
ously created can be used as such.
1 Click the [Files] key on the Serato DJ software screen to
open the [Files] panel.
The contents of your computer or the peripheral connected to the computer are
displayed in the [Files] panel.
2 Click the folder on the [Files] panel containing the tracks
you want to add to the library to select it.
3 On the Serato DJ software screen, drag and drop the
selected folder to the crates panel.
A crate is created and the tracks are added to the library.
1 2
1 [crates] panel
2 [Files] panel
Loading tracks
1 From the [crates] panel, click [crates], etc., to open [Library].
2 Select a track from [Library], then drag and drop it to
[DECK1] to load it.
Playing tracks
Here we explain how to output the sound of [DECK1] (CH2) as an example.
! Set the volume of the devices (power amplifier, powered speakers, etc.) con-
nected to the [MASTER1] and [MASTER2] terminals to an appropriate level.
Note that loud sound will be output if the volume is set too high.
1 Press the play button on the connected player and play
track 1.
Play a track in the Serato DJ software.
2 Turn the [TRIM] control.
Turn the [TRIM] control to adjust so that the channel level indicator’s orange indica-
tor lights at the peak level.
3 Move the channel fader away from you.
4 Turn the [MASTER LEVEL] control to adjust the audio level
of the speakers.
Adjust the sound level output from the [MASTER1] and [MASTER2] terminals to an
appropriate level.
Note
This unit and the Serato DJ software include a variety of functions enabling individu-
alistic DJ performances. For details on the respective functions, see the operating
instructions and the Serato DJ software manual.
! This unit’s operating instructions can be downloaded from the Pioneer DJ
support site. For details, see “Acquiring the manual” in this unit’s operating
instructions.
! The Serato DJ software manual can be downloaded from the Pioneer DJ support
site below.
See [Software Info] under [DJM-900SRT].
http://pioneerdj.com/support/
Quitting the system
1 Quit [Serato DJ].
When the software is closed, a message for confirming that you want to close it
appears on the computer’s screen. Click [Yes] to close.
2 Press the [POWER] button on this unit’s rear panel to turn
the power off.
3 Disconnect the USB cable from your computer.
— The specifications and design of this product are subject to change without
notice.
© 2013 PIONEER CORPORATION. All rights reserved.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
<DRI1157-A>