Pitco Frialator 12 Fryer User Manual


 
OPERATING THE COMPUTER CONTROL:
To check the ACTUAL Temperature Press the
key (After 5 seconds the display will return to the run
mode.)
To check the SET Temperature Press the
key two times. (After 5 seconds the display will return to the run
mode.)
To check the COOK, SHAKE or HOLD times press the
key and the desired PRODUCT NUMBER
key. (The times will be automatically displayed in sequence, the display will return to the run mode.)
The BOIL mode will be automatically displayed when the computer senses a constant temperature of 100 ºC.
This will only happen when water is in the machine during the Weekly Cleaning process. To cancel the BOIL
mode, turn the machine off and ON again. The computer will automatically exit the BOIL mode when the oil
temperature exceeds 100 ºC.
PROGRAMMING THE COMPUTER CONTROL:
To program the SET Temperature press
and enter the desired Temperature.
To return to the COOK mode at any time press
To set COOK TIME press and a PRODUCT KEY. Enter the desired time and press
to set its SHAKE TIME. Press again to set its HOLD TIME. Press & to return to
the COOK mode.
To enter the next level of programming press and enter the PASSWORD (if one is set). Press and
SELECT will be displayed.
To change from ºF to ºC press and use to toggle between the options.
To set the PASSWORD option press to display SET PASS and use to toggle between PASREQ and
NOPASS. When a PASSWORD is required press and set the desired four digit password.
To set the BEEPER VOLUME press and use to toggle between the three available volume levels.
To set the LANGUAGE option press and use to toggle between the available options.
To set the desired MELT CYCLE option press and use to toggle between the NO MELT, LIQUID &
SOLID melt cycle options.
To view the RECOVERY TEST TIME press and use again to display the recovery data.
To change CONTROL modes press and use to toggle between COMPUTER and TIMER control
modes.
OPERATING THE DIGITAL CONTROL:
Press the key to turn the machine ON and OFF.
Press the key to start the Left Hand TIMER and BASKET LIFT (when installed.)
Press the key to start the Right Hand TIMER and BASKET LIFT (when installed.)
Press the key to check the ACTUAL Temperature.
Press the key to enter the PROGRAMMING mode.
PROGRAMMING THE DIGITAL CONTROL:
Use the and keys to adjust the settings when a change is needed during the programming.
Press the to enter the PROGRAMMING mode. The Left COOK TIME will be displayed, adjust as
needed. Press the again and the Right COOK TIME will be displayed, adjust as needed. Press the
again and the SET operating temperature will be displayed, adjust as needed. Press the again and
the MELT CYCLE option will be displayed, adjust as needed. Press the key again and LOC or UNLOC will
be displayed. The With/Without PASSWORD option may be changed. Press the key again and the ºF/ºC
option will be displayed, adjust as needed. Press the key again and the Right COOK TIME will be
displayed again. To EXIT the PROGRAMMING mode press and hold the key until MELT, HEAT or
DROP is displayed.
6
P
P
P
P
P
P
P
P
P
1
0
0
0
2
3
0
4 0
0
5
6
7
0
0
P
P
P
P
P
P
P
P