Pitco Frialator Compact Pasta Control Pasta Maker User Manual


  Open as PDF
of 5
 
Pitco Compact Pasta Control
60143701
L20-269 Rev 0
Pg. 4 of 5
3 Programming:
To enter the programming menu, press the [P] key for 3 seconds. Display will show one of two possible
displays; [Pr--] for Program entry or [Loc] for locked entry.
3.1 To Unlock
If control is displaying [Pr--] skip this step. While display
is showing [Loc], press the Down arrow key once followed
by the Up arrow key. Display will show [Pr--]. Control is
now unlocked ready for programming.
3.2 To Change Simmer Temperature
With display showing [PR--]. Press the [P] key, display will show [tEnP]. Press the
down arrow key to display the current simmer temperature setting as [xxxF], or
[xxxC]. To change this setting, use the Up and Down arrow keys to adjust temperature. Press the [P] key to
save value. Display will show [tEnP]. Continue to the next step.
3.3 To Change Timers 1-4:
3.3.1 With display showing [tEnP], press the [P] key once. Display will show
[1234] to indicate that timers 1 through 4 may be selected.
3.3.2 Press the timer key needing adjustment. The indictor above that key will
illuminate, and the display will show the current timer setting for this key
in minutes and seconds format [MM:ss].
3.3.3 Use the Up and Down arrow keys to adjust timer setting, then press the [P] key to save value for this
key.
3.3.4 Display returns to [1234]. Repeat from step 3.3.2 for other timer keys in this group.
3.3.5 When all keys in this group are set, press the [P] key to continue.
3.4 To Change Timers 5-8:
3.4.1 Display will show [5678] to indicate that timers 5 through 8 may be
selected.
3.4.2 Press the timer key needing adjustment. The indictor above that key will
illuminate, and the display will show the current timer setting for this key
in minutes and seconds format [MM:ss].
3.4.3 Use the Up and Down arrow keys to adjust timer setting, then press the [P] key to save value for this key.
3.4.4 Display returns to [5678]. Repeat from step 3.4.2 for other timer keys in this group.
3.4.5 When all keys in this group are set, press the [P] key to exit programming to normal operations.
 previous