Pitco Frialator E400T Fryer User Manual


 
OPERATION
L20-258-UK Rev.01 8/16/04 5
WARNING
This appliance must be installed using restraining devices to prevent accidental tipping or
movement. DO NOT attempt to move the appliance when it is in use or has hot liquid in it.
Splashing hot liquids can cause severe burns.
WARNING
Water and shortening/oil DO NOT mix. Keep liquids away from hot shortening/oil.
Dropping liquid frozen foods into the hot shortening/oil will cause violent boiling.
Appliance Start-Up
WARNING
DO NOT start the appliance without filling the tank with shortening/oil first!
For models with electric thermostat option refer to the following instructions.
a. Place the ON/OFF (I/O) rocker switch on the front panel to the ON ( I ) position. A light on
the switch will illuminate.
b. Turn the temperature control knob (thermostat) to the desired temperature setting. The
thermostat will automatically raise the oil temperature to the desired setting.
c. You may begin cooking product once the appliance has reached setpoint. To cook
product, fill basket with the product to be cooked and place basket in fry tank. The
thermostat will automatically begin to compensate for the temperature drop. You will
need to time your cook session.
For models with Compact Computer Control refer to the following instructions.
a. Press the ON/OFF (I/O) button to turn appliance on.
b. The control will automatically raise the oil temperature to
the preprogrammed setpoint.
c. You may begin cooking product once the appliance
reaches setpoint or the display reads “drop”. To cook
product, fill basket with product to be cooked, place
basket in fry tank and press the preprogrammed cook
timer key associated with the product that you are
cooking.
d. Cook timers T1-T4 may be used merely by pressing the
corresponding key. To use cook timers T5-T8, first
press the SHIFT key, followed by the appropriate cook
timer key.
e. For programming and further operation instructions refer to the programming guide that
was shipped with your appliance.