Filter
Top Products
MODEL SG6H FRYER OPERATION
L20-332, rev. 1 (05/11) 17
2.6. APPLIANCE SHUTDOWN
There are two shutdown modes of appliance operation: STANBY and COMPLETE. The standby
mode removes the ability of the appliances main burners to operate. Complete shutdown turns off the
gas supply to the appliance. Refer to the following procedures to enter the appropriate shutdown
mode.
2.6.1. STANDBY MODE
1. Turn the temperature controller or thermostat OFF.
Solid State Thermostat:
Turn the I/0 (ON/OFF) switch to the I (OFF) position
Computer and Digital Control:
Press and hold the
*
button to turn the controller OFF.
*The specified button may appear slightly different then shown. Refer to the
operator’s manual for your appliance’s specific control type to determine the exact
appearance of each button and display.
2.6.2. COMPLETE SHUTDOWN
1. Turn the temperature controller or thermostat OFF.
Solid State Thermostat:
Turn the I/0 (ON/OFF) switch to the I (OFF) position
Computer and Digital Control:
Press and hold the
*
button to turn the controller OFF.
*The specified button may appear slightly different then shown. Refer to the
operator’s manual for your appliance’s specific control type to determine the exact
appearance of each button and display.
2. Turn the ON/OFF knob on the gas valve clockwise to the OFF position.
3. The appliance is now completely shut down and can be cleaned if desired.
OFF
ON
WARNING
NEVER leave the appliance in
standby mode for prolonged
periods or overnight.