Filter
Top Products
Fig. A
Nonstick coating
Control
Master
heat control
Drip tray
Cool touch
base
Tilt’nDrain
feature...
Easily adjusts from a level grilling surface for eggs
and pancakes...to a tilted draining surface for meats.
Simply pull out on handles to tilt the grilling surface.
Push handles back in to return to a level surface.
Important Cord Information
Connect the power supply cord to a polarized outlet only. As a safety feature, this appliance has a polarized plug (one
blade is wider than the other). This plug will only fit in a polarized outlet one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety
feature.
A short power supply cord (or cord set) is provided to reduce the risk resulting from becoming entangled in or trip-
ping over a longer cord. Extension cords may be used if care is properly exercised in their use.
If an extension cord is used, the marked electrical rating of the extension cord should be at least as great as the elec-
trical rating of the appliance. The extension cord should be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or tripped over.
How To Use
Before using for the first time, become familiar with the griddle features, Fig. A. Wash griddle in warm, sudsy water,
rinse, and dry. Do not immerse Control Master
heat control or let the heat control come in contact with any liquid.
“Season” the nonstick cooking surface by rubbing lightly with cooking oil. Remove excess oil with paper towel.
1. Place griddle on a dry, level, heat resistant surface.
2. Insert the Control Master
heat control into the griddle so the two electrical pins on the griddle are fully inserted
into the heat control. Connect cord to outlet.
3. When cooking meats, pull out on handles to tilt the
grilling surface, Fig. A. This allows excess fat to drain
into the drip tray. When cooking other foods, such as
eggs and pancakes, be sure the handles are pushed in
so the griddle is level.
4. Turn Control Master
heat control to desired
temperature (see page 4 for cooking temperatures).
Preheat griddle. Pilot light goes off when selected
temperature is reached (this takes approximately
5 to 10 minutes).
5. Prepare food for cooking. Because the griddle features
a nonstick finish, food may be prepared with little or
no oil.
6. Place food on griddle and cook according to
temperature-timetable (page 4). Heat should be
adjusted according to personal preference and
particular food being cooked. During cooking, pilot light will go on and off indicating desired temperature is
being maintained.
7. Turn heat control to OFF when cooking is completed. Unplug heat control from wall outlet then from appliance.
Allow unit to cool before removing grease tray.
NOTE: This griddle is not intended to be used as a warming tray.
Care and Cleaning
Before initial use and after each subsequent use, wash griddle in warm sudsy water, rinse, and dry. Do not immerse
Control Master
heat control in water or let it come in contact with any liquid.
For best results use nylon, plastic, wooden, or rubber utensils. Do not use metal utensils as they may scratch the
nonstick surface. Do not cut foods on the cooking surface.
2