Proline PLZIGL1 Ventilation Hood User Manual


 
User manUal | 17
17 |
PROLINE
ranGe HooDs
replacing the light bulb
Make sure the range hood is unplugged or turn OFF breaker
Place a flat-head screwdriver between light cover and housing to remove cover
Gently pull defective bulb straight out and discard
Wear a cotton glove or use a cloth to handle the replacement bulb (DO NOT
handle with bare fingers as this may shorten the life of the bulb)
Push gently but securely into light socket. (DO NOT push too hard as bulb legs
may break off)
Replace light cover
Turn ON breaker and range hood to test operation
removing the lter
The filter (A) is located on the bottom of the hood, directly above the cooking
surface.
Hold the filter in place with one hand and pull back on the release lever (B)
with the other.
While pulling back on the release lever, lower the filter out of the hood. On
hoods with more than one filter, remove, clean and replace all of the filters.
Care & Cleaning