3
Door Handle Fitting
The door handles fix onto the mounting studs already fitted
to each door.
Use the M3 grub screws and Allen key from the instruction kit
bag. Each handle will require 3 grub screws.
1. Place the handle firmly over the mounting studs.
2. Insert the grub screw into the hole located under each
handle standoff bar.
3. Using the M3 Allen key, tighten the grub screw fixing
the handle to the door.
Do not over-tighten the grub screw.
Unplug the refrigerator when:
• Cleaning or maintenance
• Replacement of the lamp.
Adjustable feet
Make sure that the appliance is on solid level flooring. If the
refrigerator is placed on a plinth, flat, strong and fire resistant
materials must be used.
This appliance has front adjustable feet, which can be used to
level the appliance, or adjust door alignment.
Door adjustment
The doors may require some alignment adjustment before
you connect the appliance to the electricity supply. This can
be done by making minor adjustments to the feet:
If the freezer door height is lower than the refrigerator door,
use a screwdriver in the slots of the front left-hand adjustable
foot, turning clockwise until the freezer door height is raised
in line with the fridge door. If the freezer door is lower, adjust
the right-hand foot using the same method.