Filter
Top Products
-7-
6. After cleaning, install the Blade and Blade-Locking Nut on main unit
in reverse order of Step 3. Make sure the Blade-Locking Knob is
properly engaged. Remember to turn the Thickness Adjustment Knob
to setting ‘O’.
CAUTION: Do not disassemble Slicer, other than stated in the above
cleaning instructions.
HOW TO CLEAN YOUR SLICER
(
CONTINUED
)
CAUTION: Blade is sharp. Handle carefully. Do not wash blade in
dishwasher. Do not immerse main unit in water. Do not remove lubricant
from the gears.
1.
Always unplug the appliance and let the Blade come to a complete
stop before cleaning.
2.
Adjust the Thickness Knob to setting ‘O’
before cleaning.
3.
To clean the Blade, hold the Blade by
one hand and use a coin to unlock the
Blade-Locking Nut by turning it
clock-wise (Fig 5). Remove the Blade by
gripping the hole portion of the Blade.
4.
The Blade, Food Press Plate, Feeder, and
Food Tray should be hand washed and
dried immediately. Use caution when cleaning the Blade, it is
extremely sharp. Do not touch the sharp edge.
The Blade should not be left to soak in water. Wash, rinse, and dry Blade
immediately. Install Blade in main unit after it has dried.
NOTE: The white lubricant on the gears of the Blade and Motor assembly
is used to reduce the friction and noise of the gears. It should not be
removed. If removed, the life of the gears and cutting performance will
be limited and the noise will increase. In case of total removal of
lubricant, food grade lubricant may be applied. Never apply industrial-use
or automobile use lubricant to the gears.
5.
Clean the outer surface of the main unit with a damp cloth. It is
recommended to clean the main unit with the Blade removed. Never
immerse the main unit in water.
-6-
HOW TO CLEAN YOUR SLICER
Figure 5
1060C05EM1 P.qxd 2/26/05 11:16 AM Page 11