Rival BL-706 Blender User Manual


 
3
LINE CORD SAFETY TIPS
1. Never pull or yank on cord or the appliance.
2. To insert plug, grasp it firmly and guide it into outlet.
3. To disconnect appliance, grasp plug and remove it from outlet.
4. Before each use, inspect the line cord for cuts and/or abrasion marks. If any are
found, this indicates that the appliance should be serviced and the line cord
replaced. Please return it to our Service Department or to an authorized service
representative.
5. Never wrap the cord tightly around the appliance, as this could place undue stress
on the cord where it enters the appliance and cause it to fray and break.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
An extension cord may be used with care. However, the marked electrical rating shall
be at least as great as the electrical rating of this appliance. The extension cord should
not be allowed to drape over the tabletop where it can be pulled on by children or tripped
over.
IMPORTANT
During the first few minutes of initial use, you may notice a slight odor. This is normal
and should quickly disappear. It will not recur after appliance has been used a few more
times.
The blades are VERY sharp.
ALWAYS unplug the appliance before assembling, disassembling,
cleaning or storing.
The appliance must be kept out of reach of children.
Do not hold the motor housing under running water, nor immerse it in water.
The appliance is constructed to process normal household quantities.
HOW TO OPERATE YOUR BLENDER
BEFORE INITIAL USE:
Unpack the blender and wash the lid, measuring cap, plastic jar, gasket, and cutting
blade assembly in hot, soapy water before use. The lid/cap and cutting blade
assemblies must be disassembled before washing.