Filter
Top Products
OPERATING INSTRUCTIONS
PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATIONS
1. Guide bar
2. Magnet
3. Lever Arm
4. Cutting blade
5. Geared wheel
IMPORTANT NOTES:
To ensure continued efficient performance by this can opener, keep the cutting blade
clean.
Can opener should be turned off for one minute after operating for 5 minutes.
TO USE CAN OPENER
1. Raise Lever Arm, place can under the Guide Bar and against the Geared Wheel.
2. Press down on Lever to pierce lid of can. This automatically starts the cutting
action. The can opener will continue to cut until the lid is completely severed from
the can.
3. Grasp the can, then raise the Lever Arm to release the can.
4. Carefully slide the lid away from the Magnet, using caution to avoid being injured
by the sharp edge of the lid.
3