Rival CN-707 Can Opener User Manual


 
4
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance and contains no user serviceable parts. Do not
try to fix it yourself. Refer it to qualified small appliance service facility if servicing is
needed.
TO CLEAN: Unplug unit from electrical outlet. To remove lever, hold can opener facing
you. Lift the lever arm upward and gently pull toward you until the pivot pin is clear of the
pivot hole. Wash lever in warm, soapy water and wipe outside surfaces of unit with a damp
cloth. To replace the lever, hold the can opener facing you with the lever in the lifted
position, and put the long pivot into the pivot hole. Be sure to push completely into pivot
hole. Then let lever drop back onto top of can opener. If you do not push lever completely
into hole, it will not drop back into place.
TO STORE: Unplug and store in its box or in a dry place. Store the cord loosely coiled;
never wrap it tightly around the unit. Do not put any stress on cord where it enters the
appliance as it may cause the cord to fray and possibly break.