Rival S12-WN Fryer User Manual


 
SAVE THESE INSTRUCTIONS
KNOW YOUR ELECTRIC SKILLET
This appliance has a polarized plug (one blade is wider than the
other). As a safety feature, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
POLARIZED PLUG
steam vent
lid knob
non-stick surface on pan
lid
This appliance is for HOUSEHOLD USE ONLY. No user-serviceable parts
inside. Power Unit never needs lubrication. Do not attempt to service this
product.
A short power-supply cord is provided to reduce the hazards resulting from
entanglement or tripping over a longer cord. AN EXTENSION CORD MAY BE
USED WITH CARE; HOWEVER, THE MARKED ELECTRICAL RATING
SHOULD BE AT LEAST AS GREAT AS THE ELECTRICAL RATING OF THE
SKILLET. The extension cord should not be allowed to drape over the counter
or tabletop where it can be pulled on by children or unintentionally tripped over.
KEEP WARM SETTING: The TEMPERATURE CONTROL PROBE has a
“Keep Warm” range setting of approximately 160° to 180° F. The indicator light
will cycle on and off when this setting is maintaining the desired temperature.
NOTE: During initial use of this appliance, some slight smoke and/or odor may
be detected. This is normal with many heating appliances and will not recur
after a few uses. Only use with Temperature Control Probe number NWTC-1.
side handle/leg
-3-
NOTE: Do not operate skillet prior to
assembly of LID KNOB.
-2-
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed, including the following:
1. Read all instructions before using.
2. Be sure that the lid knob is assembled and fastened properly before
using this appliance. See assembly instructions on page 4.
3. Do not touch hot surfaces. Use HANDLES or KNOBS.
4. To protect against electrical shock, do not immerse CORD, PLUG,
or TEMPERATURE CONTROL PROBE in water or other liquid.
5. Close supervision is necessary when any appliance is used near
children. This appliance is not to be used by children.
6. Unplug from outlet when not in use and before cleaning. Allow to
cool before putting on or taking off parts, and before cleaning.
7. Do not operate any appliance with a damaged CORD or PLUG or
after the appliance malfunctions or has been damaged in any
manner. Return appliance to Rival
®
(see warranty) for examination,
repair, or adjustment.
8. The use of accessory attachments not recommended by Rival
®
may
cause injuries.
9. Do not use outdoors.
10. Do not let CORD hang over edge of table or counter, or touch
heated surfaces.
11. Do not place on or near a hot gas or electric burner, or in a heated
oven.
12. Extreme caution must be used when moving an appliance containing
hot oil or other hot liquids.
13. Always attach TEMPERATURE CONTROL PROBE to appliance first,
then plug cord into the wall outlet. To disconnect, turn TEMPERA-
TURE CONTROL DIAL to “OFF”, then remove plug from wall outlet.
14. Do not use appliance for other than intended use.
side handle/leg
probe guard
S12WN.01.US.OM1_S12WN Manual 11/21/01 12:01 PM Page 2