Filter
Top Products
hl=UP COOKTOP AND SURFACE BURNERS
1.
Remove the surface burner grates.
I 1 I
2. Lift the front of cooktop at both front corners
until the support rods
lock into place.
NOTE: Do not drop the
cooktop. Damage could
result to the porcelain
and the cooktop frame.
3. Wipe the surface under the cooktop with warm,
pad on heavily soiled -
areas.
4. Wipe off the surface bur
ners with warm, soapy
water and a sponge
after each use. To
remove cooked-on food,
soak the burners in a
vinegar and water
solution for 20-30 min-
utes. Then scrub them
with a plastic scrubbing
pad. (See page 17 for
more information.)
Carbon Monoxide Poisoning Hazard
Do not operate with a yellow flame.
Doing so can result in death, heart attack,
or convulsions.
5. Check the burner flames once in a while for proper
size and shape as shown.
Ports
A good flame is blue in
yA q
color. If flames lift away
-l’Y--
from ports, are yellow,
or are noisy, turn off the
-
burner. Allow the burner
.v.v. .u.u.u
to cool and follow Step 6.
- If you still have a problem,
contact an authorized
Whirlpool service techni-
cian to check the air/gas
mixture or see the Installation Instructions.
6.
If the ports are clogged, clean with a straight
clog the ports.
I
.
I
18