Filter
Top Products
After the time has elapsed, the microwave will automatically beep 3 times. It will
continue to be three times every 2 minutes until the door is opened or the 'Cancel' key
pad is pressed.
Pre-set
You can pre-set the oven to start cooking at a later time. For example, if the current time
is 2.30pm, you can set the oven to start at 4.30pm and cook for 20 minutes.
1 Press the 'Pre-set' key pad. The display will show ':0' and the clock symbol will
light up.
2 Press the numerical key pads '1, 6, 3, 0'. The time will be displayed.
3 Press the 'Power' key pad. The display will show 'P10', clock symbol and the
'1s'. If you don't want to cook food at 100% power, press the numerical key pad
for the power you want (see chart on page 8).
4 Press the 'Time' key pad and press the numerical key pads '2,0,0,0' to set the
time 20 minutes.
5 Press the 'Start' key pad. The clock display will flash until the oven starts to
operate at 4.30pm.
Two stage cooking can also be chosen in the pre-set setting. For example, if the current
time is 2.30pm, you can set the oven to start at 4.30pm and cook for 20 minutes on one
power level and then for 10 minutes on another power level.
1 Press the 'Pre-set' key pad. The display will show ':0' and the clock symbol will
light up.
2 Press the numerical key pads '1, 6, 3, 0'. The time will be displayed.
3 Press the 'Power' key pad. The display will show 'P10', clock symbol and the
'1s'. If you don't want to cook food at 100% power, press the numerical key pad
for the power you want (see chart on page 8).
4 Press the 'Time' key pad and press the numerical key pads '2,0,0,0' to set the
time 20 minutes.
5 Do not press the 'Start' key pad, instead press the 'Memory' key pad. The
display will show '2s' ( second stage cooking).
6 Press the 'Time' key pad, the display will show ':0'. Enter the time you want to
cook the food for using the numerical key pads. For example, to cook for 10
minutes in stage 2, press '1,0,0,0'.
7 To set the power, press the 'Power' key pad, the display will show 'P10'. If you
want to choose a different power level setting, press the 'Number' key pad you
want from the chart on page 8. For example, if P5 is chosen, P5 will be
displayed.
8 Press the 'Start' key pad. The clock display will flash until the oven starts to
operate at 4.30pm.
10