Russell Hobbs RHSLDW1B Appliance Trim Kit User Manual


 
How to use
17
Loading your dishwasher
Ensure dishes are placed in the machine with sufficient space for water to flow around
the dishes. This will allow optimum energy efficiency.
There are two baskets provided with this machine, the upper basket is designed for
cups, glasses, shallow dishes and tea plates. The lower basket is designed for larger
plates, cooking pans and dishes.
For washing cutlery, ensure you use the cutlery basket provided. When washing knives,
ensure these are placed point down on in the basket.
Ensure that you do not balance glasses against each other as these may not remain
stable during the wash cycle may break which could result in injury.
Important note
Place items in the machine in a way which will not cause the upper spray arms to be
obstructed. This will stop the machine functioning correctly.
Dish rack(s)
Dish racks are located on the upper basket of the machine. When these are in the open
position (a), they can be used for placing cups and long knives on. When in the closed
position (b), long glasses can be placed in the upper basket
Top basket height adjustment
The top basket of the machine is adjustable to allow more room in the bottom basket for
bigger items. To adjust your basket, open the basket retaining parts at the end of the
basket rails by turning them to the sides, then take the basket out. Change the position of
the wheels and replace the basket onto the rail. Ensure you close the retainers at the end
of the basket hold. This will allow you to raise and lower the basket as desired.