Filter
Top Products
‘Wash/Dry’ and ‘End’ keep flashing
• Water overflow alarm is active.
• Turn off the tap and contact Product Care on 0845 208 8750 for further advice.
Control lamps illuminated after cycle has finished
The ‘On/Off’ button has not been released.
Detergent residues are left in the detergent compartment
Detergent has been added when the detergent compartment is wet. Wipe dry the
detergent compartment before using the machine again.
Water will not drain
• The water drain hose is clogged or twisted.
• The filters are clogged.
• The programme has not yet finished.
The machine stops during cycle
• Power failure.
• Water inlet failure.
• Programme may be in standby.
• The door has been opened and not closed correctly.
Dishwasher is noisy
• Dishes are placed incorrectly inside the machine.
• The spray arm is hitting the dishes.
Dishes are still dirty after washing
• Dishes are not placed correctly in the machine – spray water is not hitting them.
• Basket is overloaded.
• Not enough detergent is added.
• An unsuitable programme has been selected.
• Spray arm has become clogged.
• Filters are clogged.
• Filters are incorrectly fitted.
• Water drain pump is clogged
Trouble shooting
25