Filter
Top Products
English
23
8 - PURIFIER
REGENERATION
A WATER INLET
B WATER OUTPUT
C INLET TAP LEVER
D OUTPUT TAP LEVER
E DEPRESSURIZER PIPE
F REGENERATION TUBE
G COVER KNOB
IMPORTANT : Regenerate the purifier at the
intervals listed below:
- place the empty 2 litre container under pipe E.
- shift levers C and D from left to right as shown in fig.8.2
and remove the cover by loosening knob G, pour in 1.5
kg of sodium chloride (coarse cooking salt) into the 8-litre
purifier and 2 kg into the 12-litre type.
- Replace the lid and shift lever from right to left as shown
in fig.8.3 and allow the salted water to drain out of pipe
F until the water is fresh.
- Shift lever D from right to left as shown in fig.8.4
NB: These regeneration instructions are valid only
providing the purifier is as that indicated in the
figures. Should it fail to correspond proceed as
indicated in the instructions attached to the purifier
itself.
F°SSENDRAHF°SSENDRAH
F°SSENDRAH
F°SSENDRAHF°SSENDRAHREIFIRUPERTIL8REIFIRUPERTIL8
REIFIRUPERTIL8
REIFIRUPERTIL8REIFIRUPERTIL8REIFIRUPERTIL21REIFIRUPERTIL21
REIFIRUPERTIL21
REIFIRUPERTIL21REIFIRUPERTIL21
02ot00morF.l0011retfanoitarenegerl0061retfanoitareneger
03ot12morF.l058retfanoitareneger.l0521retfanoitareneger
04ot13morF.l056retfanoitareneger.l059retfanoitareneger
06ot14morF.l054retfanoitareneger.l056retfanoitareneger