Saeco Coffee Makers SUP021YNR Espresso Maker User Manual


 
INSTALLATION / VENTILATE
Fill the coffee bean container
with coffee beans.
Fill the tank with fresh drin-
king water.
Move the ON/OFF switch
to “I” to turn on the
machine.
Insert the plug into a sui-
table electric socket.
See rating plate
Place a container beneath
the steam tube.
Turn the knob countercloc-
kwise to start loading the
circuit.
Wait until a steady stream
of water fl ows out from the
nozzle.
Turn the knob clockwise
to terminate the circuit-
loading process.
Remove the container. The machine is warming
up; lights are fl ashing.
Note: You must load the circuit before starting up
the machine for the fi rst time, if it has been inope-
rative for a lengthy period or if the water tank has
been completely emptied. The circuit must also be
loaded each time the light fl ashes:
The messages displayed by the machine during operation are shown
on pg.31.
Important warning for using the “Aqua Prima Filter” can be found at
page 31.
When the indicator lights
are fi xed, the machine is
ready for use.
The machine indicates that
the circuit needs loading.
Steadily lit
Flashing
Flashing
Steadily lit
Flashing
The “Aqua Prima” fi lter can
be installed (see pg.27).
22