Salton FSCM200M, FSCM200RM, FSCM200BM, FSCM200CBM Coffeemaker User Manual


 
8
HINTS FOR GREAT TASTING COFFEE
•A clean Coffee Maker is essential for making great tasting
coffee. Regular cleaning is highly recommended.
Always use fresh, cold water in your Coffee Maker.
•Finer drip grinds promote fuller extraction and provide rich,
full-bodied coffee. Regular grind will require slightly more
coffee per cup to provide the strength of a finer grind.
Store coffee in a cool, dry place. Once coffee has been opened,
keep it tightly sealed in the refrigerator to maintain freshness.
•For optimum coffee, buy whole beans and grind them finely
just before brewing.
Do not re-use coffee grounds since this will greatly impair
coffee flavor.
Reheating coffee is not recommended. Coffee is at its peak
flavor immediately after brewing.
Small oil droplets on the surface of brewed, black coffee is due
to the extraction of oil from the coffee grounds. Oiliness may
occur more frequently if heavily roasted coffees are used.
Overextraction may also cause oiliness, indicating a need to
clean your Coffee Maker.
• Your Dual Thermal Coffee Maker is the perfect solution for
households that prefer 2 separate blends of coffee. Now you
can offer family and friends caffeinated or decaffeinated coffee
prepared at the same time! Choose from coffee varieties and a
wide array of flavored coffees.
3
POLARIZED PLUG
This appliance has a polarized plug, (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit into a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
SHORT CORD INSTRUCTIONS
A short power-supply cord is provided to reduce the risk resulting
from becoming entangled in or tripping over a longer cord.
Do not use an extension cord with this product.
PLASTICIZER WARNING
CAUTION: To prevent Plasticizers from migrating from the
finish of the countertop or tabletop or other furniture, place
NON-PLASTIC coasters or place mats between the appliance
and the finish of the countertop or tabletop.
Failure to do so may cause the finish to darken, permanent
blemishes may occur or stains can appear.
ELECTRIC POWER
If the electrical circuit is overloaded with other appliances, your
appliance may not operate properly. It should be operated on a
separate electrical circuit from other appliances.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT REMOVE THE BOTTOM COVER. NO USER-
SERVICEABLE PARTS INSIDE. REPAIR SHOULD BE DONE BY
AUTHORIZED SERVICE PERSONNEL ONLY.