Filter
Top Products
Chopper Bowl to stabilize the unit while in use.
9. Once ingredients have reached the desired consistency or texture, release
the Power or Boost Button and turn the Variable Speed Dial at the top of
the Motor Body to ‘1’.
10. Wait until the motor has completely stopped before opening the Chopper
Lid.
11. Unplug from the wall outlet.
12. Remove the Chopper Blade and use a spatula to remove any food stuck
to the Chopper Blade and around the walls of the Chopper Bowl.
NOTE: The Chopper Blade is very sharp. DO NOT use your fingers to
remove food stuck to the Chopper Blade.
13. To detach the Chopper Lid, hold the Motor Body with one hand. Using
your thumb and finger, push the button on either side of the Motor Body
while holding the Chopper Lid with the other hand. Pull the Motor
Body away from the Chopper Lid until the two pieces separate.
HELPFUL HINTS
• When chopping, cut food into uniform sizes for best results.
• Do not process hard foods such as coffee, nutmeg, ice cubes or chunks of
hard chocolate. This may damage the Chopper Blade.
• Never process hot or boiling foods in the Chopper Bowl.
Wall Mount Bracket
The wall mount bracket is designed to provide convenient storage for your
hand blender so that it’s always at your fingertips.
CARE AND CLEANING
1. Make sure the unit is unplugged from the wall unit before removing
attachments from the Motor Body.
2. Wipe the Motor Body with a damp cloth. . If necessary, you can use a
little mild detergent. DO NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
7
Booklet_HB-1094_ENG:Salton Booklet 7/24/08 1:25 PM Page 7