Filter
Top Products
CARE AND CLEANING
How to Disassemble the Juicer
8
IMPORTANT: Before disassembling the Juicer make
sure that the Electronic Control is in the Off position,
the plug has been removed from the wall outlet
and the motor has stopped completely.
1. Remove the Food Pusher from the Feed Tube.
2. Remove the Pulp Container by holding onto
the Feed Tube and tilting the juicer slightly to
disengage the Safety Foot on the Pulp Container.
3. Remove the Juice Jug.
4. Hold the Pulp Chute/Juicer Cover and disengage
the Locking Bar from the grooves on the side
of the Pulp Chute/Juicer Cover. (See Ill. 1)
5. Lift and remove the Pulp Chute/Juicer Cover.
(See Ill. 2)
6. Remove the Stainless Steel Juice Collector
and Strainer Basket by placing one hand under
the spout and the other under the black plastic
edge opposite the spout and lifting upwards.
The Stainless Steel Strainer Basket can be removed
from the Juice Collector by pushing it up through
the hole in the bottom of the Juice Collector.
NOTE: Be careful when handling the Strainer
Basket as the cutting blades are very sharp.
•
•
•
•
•
•
Ill.1
Ill. 2